The pressure in line is 90 bar , can we use pipe ASTM A106 G B 4" wt 6.02 mm as flow line from well to station , please explain ?

Communiquez avec les autres et partagez vos connaissances professionnelles

Inscrivez-vous ou connectez-vous pour rejoindre votre communauté professionnelle.

Next Question:
Chilled water pipe installation Highraised apartment building Working pressur...
Posted by:
valay patel
12-November-2015

Pipeline Design

Question ajoutée par Bassam Georgeose Razzouk , executive engineer , Syrian Gas Company
Date de publication: 2016/02/01

Apprécier (0) Vues (2) Suiveurs (1) Réponses (1) Report Question

Ajoutez Une Réponse
Inscrivez-vous ou connectez-vous pour répondre.

1 Réponses

par LIJO ABRAHAM , Senior Pipeline Engineer , Archirodon

The given thickness seems to be fine considering the given inputs. The corrosion allowance shall be limited to4mm if the design factor is0. and3mm if the design factor is0.5.

Apprécier (0)

Déprécier Réponses () Rapport

Recherches Populaires

Offres d'Emploi Vendeur Offres d'Emploi Ingénieur Offres d'Emploi Technicien Offres d'Emploi Comptable Offres d'Emploi Chauffeur

Ecrivez Votre Réponse

More Questions Like This

Useful life of fixed Assets is not reversed while reversing depreciation entry in SAP B1?
Top Answer: Hello All, Likely I found it was due to some transactions document posted for a Fixed asset such as AP ... Voir Plus

Réponses (1)
How to determine choke flow condition for the liquid flow through a pipe of say 2" size? I will use this pipe only once so erosion doesn't limit flow.
Top Answer: Erosion and also in water foreign material and water quality also happens Voir Plus

Réponses (1)
What is the use of ASTM 330? And where is the use of this code?
Top Answer: ASTM E330/E330 This test method describes the determination of the structural performance of exterior win ... Voir Plus

Réponses (1)
Which is better to use Epoxy coated bars or not coated bars to use in foundations? is it still effective to resist corrosion? please mention reference
Top Answer: <p>reinforced steel bars without any coated is enoughif you used epoxy you should be very careful b ... Voir Plus

Réponses (11)

Avez-vous besoin d'aide pour créer un CV ayant les mots-clés recherchés par les employeurs?

Obtenir de l'aide

Produits Par Bayt.com

Utilisez l'Appli de Bayt.com

Communiquez avec les autres et partagez vos connaissances professionnelles

The pressure in line is 90 bar , can we use pipe ASTM A106 G B 4" wt 6.02 mm as flow line from well to station , please explain ?

Recherches Populaires

More Questions Like This