Register now or log in to join your professional community.
<p>الصيانه والصناعه <span>Ensures that the performance of required airworthiness inspections are carried out and that forms, logbooks and/or certifications appropriate to military use, public use, and general aviation use are properly prepared. Ensures assigned aircraft meet requried operating standards for safe flight and safety requirements. Monitors required forms, aircraft related reports and maintenance trends to include aircraft parts, parts inventory, parts usage, shelf-life and, associated aircraft ground support equipment. Reviews and audits aircraft, engine and propeller logbooks for proper entries and accuracy. Reviews and monitors hydraulic and engine oil sampling programs and aircraft materiel trends and condition. Investigates repeat aircraft maintenance discrepancies to determine root cause(s) and identify appropriate corrective action. Assists in general housekeeping and other duties as assigned. Coordinates and assists in site environmental, safety and health program compliance (e.g., hazardous material management). Qualifications</span></p>
There is a difference between Fanuc and Siemens in the type of microprocessor control that compile reads the program.For example, we have a two vertical milling machines with same specification. on of them from Fanuc and the other from Siemens. If we created a part in a CAD\\CAM program such as SolidWorks which is used to create the part with dimension. Then, start using CAMWorks which is used to create G-codes for CNC machines.We do the sequence process of CAMworks which is as following
1-change coordinate axis of part direction to machine axis
2-Define the machine and the post process file of the machine
3-Determine Stock's Dimensions
4-define starting point
at this point, we finish pre-process (preperation to use CAMworks)
Main operation( which takes long time) with review
5-defining machinable features in the part
6-creating operation sheet
7-toolpath for cutting tool
after reviewing this we finished almost more than95% of CNC
Now , until this point there is no difference between the two machines for Fanuc and Siemens but the difference in the post process operation.
post process:
this file should be asked when you buy any type of CNC machine if it is not provided with the correct one it will be useless such as you have Fanuc post process file and did G-code depending on it and use it in Siemens machine it will not work or work but not as you expect. so waste money.
The bottom line is that the post process file for each machines is different depending on the company that has programed the CNC machine.this file should be asked about it before you buy any type of CNC machine
Do you need help in adding the right keywords to your CV? Let our CV writing experts help you.