How to power up a PC without using case switch on button?

Basm Allah Alrahman Alrahim'

It just2 wire t be connected to turn on PC , simply open your case and look to your power at motherboard and touch both pin with any screwdriver

look to this pics

On the motherboard, look for power switch pin. Short the two pins using steel, but best using a flat screw driver. Done.

on motherboard we need to short  power switch pins with a steel screwdriver in the front panel connection area. if the power switch is not working temporarily we can use reset button. remove the wires of power switch and use the reset wires on the power pins.

If you are asking me to boot the PC manually then above will be my answer but if you are asking me to boot on Network then I will use Network Boot

• DHCP protocol, used to initialize network configuration for a client
• TFTP protocol, used to download a network boot program (NBP)
• HTTP protocol, used to download data from a web server
• PXE - a way to boot Intel computers using DHCP and TFTP
• UNDI - an API used by the PXE environment to generalize access to networking hardware.

on motherboard in switch pin only touch it by screwdriver