الحوارات الشائعة في مجتمع أنظمة سطح المكتب

تابعنا

اسأل مجتمع المهنيين


اطرح أسئلة مهنية واحصل على أجوبة متميزة من المتخصصين الآخرين.

تدفق اللغة
Syed Hussain's image
تم إضافة السؤال من قبل Syed Hussain IT Analyst TCS
قبل 8 سنوات
الإجابات:
16
تابع:
المشاهدات:
271
عدد الأصوات:
1
يجب أن تتألف الإجابة من 25 حرفاً على الأقل.
Default profile image
تم إضافة السؤال من قبل مستخدم محذوف‎
قبل 10 سنوات
الإجابات:
1
تابع:
المشاهدات:
111
عدد الأصوات:
2
يجب أن تتألف الإجابة من 25 حرفاً على الأقل.
Salman Ahmed's image  
تم إضافة الجواب من قبل  Salman Ahmed, Sr. System Engineer, Alpha Data
قبل 8 سنوات

Option1 Go to Device Manager, network adapters, Network Adapter / Ethernet card and right click and select the properties, in General tab under the device status see the ... الإطلاع على المزيد

Default profile image  
تم إضافة الجواب من قبل  مستخدم محذوف‎
قبل 8 سنوات

there are two ways-  1. see whether the lights on NIC card are blinking are not. if only orange is blinking means its only receiving the signal. If both are blinking mean ... الإطلاع على المزيد

Muhammad adnan Qumar's image  
تم إضافة الجواب من قبل  Muhammad adnan Qumar, IT engineer, Synopsis Solutions Ltd
قبل 8 سنوات

Follow these steps to check on the NIC hardware: Open the Control Panel. Open the Device Manager. In Windows 7, choose Hardware and Sound, and then choose the Device ... الإطلاع على المزيد

Default profile image  
تم إضافة الجواب من قبل  dibu baby , Systems Engineer, KDU Worldwide Technical Services
قبل 8 سنوات

1.To test your NIC card Ping the following IP.0.0.1(loopback ip) it is the internal layer3 IP address built in to your NIC card. You can ping this with the machine not co ... الإطلاع على المزيد

Ahmad Abbas's image  
تم إضافة الجواب من قبل  Ahmad Abbas, Network / System Support Engineer, FAD Investment & Development Company
قبل 8 سنوات

Check the LED colour is it green mean working , red or amber / orange mean some problem.Device manager is also good and easy way to show is you LAN /NIC working or not.

habeeb mohamed's image  
تم إضافة الجواب من قبل  habeeb mohamed
قبل 7 سنوات

    Go to command prompt and try to ping an IP 127.0.0.1 If its replayed without any packets its mean the NIC card is working properly