Communiquez avec les autres et partagez vos connaissances professionnelles

Inscrivez-vous ou connectez-vous pour rejoindre votre communauté professionnelle.

Suivre

Which is the best routing protocol i should use only ? RIP, RIPv2, IGRP, EIGRP, OSPF.

Routing Protocol are a lot where i should use each of them ?

user-image
Question ajoutée par هاشم المشارقة , Key Account Manager , Advanced United Systems Ltd. ( A member of Taj Holding Group)
Date de publication: 2014/04/16
Nidal AlSafadi
par Nidal AlSafadi , Core Network Administrator , ISP for Internet and Telecommunication Services

It depends on your network design and complexity

If you have a small network, you can use rip

if your equipemnts all is cisco, use EIGRP and that's if your network medium or large and complex

Otherwise, you must do it with OSPF and it's the best because of vendors suuports ( Linux - UNIX - Cisco - Juniper - HP ... etc )

 

Fayyaz Ahmed
par Fayyaz Ahmed , IP Core Expert , ZTE

It depends upon your Network topology.

OSPF (multivendor environment) & EIGRP (Cisco Only) are best if nodes are less than 200, but for 200+ nodes ISIS routing protocol is the best.

Abdullah Mokhtar
par Abdullah Mokhtar , Senior Datacenter Consultant , Crystal Networks

RIP v2 if you have a simple network

EIGRP if you only have cisco and mid-large network

OSPF if you have different Vendors and mid-large network

Mithun Raj Thycandy
par Mithun Raj Thycandy , IT Engineer , Mannai corporation

Best to use EIGRP. OSPF can be used with EIGRP once you have any non-CISCO device. Go on with EIGRP.

MOHD YASIR
par MOHD YASIR , Solution Architect Support , Tech Mahindra ltd

EIGRP beause it's speed of conversion is very high in compare remains routing protocole but if u have different different vender router  device then then OSPF is best beause EIGRP has some limitation it's supported only cisco devoice

Check EIGRP, it is the best routing protocol and it is a open protocol now.

Haroon Khan
par Haroon Khan , System & Network Administrator , Al-Fares Group of Companies

My take is:

1. If you are using all routers from a cisco EIGRP is better,

2. otherwise OSPF flexible works with many vendors devices.

Rejad Hashim
par Rejad Hashim , Senior Network Security Engineer , Magna Infotech Deployed at KLA Tencor

The Best Routing protocol in cisco is EIGRP because it uses DUAL to provide very quick convergence and a loop-free network.

But for different Devices OSP is the best, as it supports in all the routing devices

Sharowar Jahan
par Sharowar Jahan , Sr.Network Engineer , Mango Teleservices Limited

Its depends on your network size and network devices.if your net work is mid level and all your devices is cisco EIGRP is best routing protocol for you. But if you have multi vendor devices and your network is big and complex you should use OSFP and it is best for your network.

mir mohammed wasif azam
par mir mohammed wasif azam , Network & Security Engineer , Delta Internationals Projects & Engineering

Eigrp is best protocol when you have all cisco vendor devices but ospf is also good on cisco and non- cisco devices it is good when you do redistribution from anyother protocol into ospf but in eigrp case it is not that much effective for redistribution into any other protocol.eigrp is always good within igp cisco devices but no as good as ospf when you do redistribution.

More Questions Like This

Avez-vous besoin d'aide pour créer un CV ayant les mots-clés recherchés par les employeurs?