Communiquez avec les autres et partagez vos connaissances professionnelles

Inscrivez-vous ou connectez-vous pour rejoindre votre communauté professionnelle.

Suivre

How to decide if the rotor affect by the vibration, and what is the interval of tolerance on vibration amplitude of GE 3002 Gas Turbine?

user-image
Question ajoutée par Mohamed BEN RAHMOUNE , Assistant , University Ziane Achour of Djelfa
Date de publication: 2017/01/02
Bencherik Amar
par Bencherik Amar , Mechanical engineer , SONATRACH

As vibration isolation and reduction techniques have become an integral part of machine design,the need for accurate measurement and analysis of mechanical vibration has grown.

recommended vibration monitoring fo shaft speed / phase reference a keyphasor transducer should be supplied on each independent (non-mechanically coupled) shaft to provide a once-perturn reference signal for determining vibration phase and shaft rotative speed. It is generally recommended that the Keyphasor transducer be installed on the driver in a machine train, so that if the unit is run uncoupled, a phase reference signal will still be available. This is not possible when a Keyphasor transducer is only installed on the driven machine.

when frequency analyzing machine vibrations we normally find a number of prominent periodic frequency components which are directly related to the fundamental movements of various parts of the machine. With frequency analysis we are therefore able to track down the source of undesirable vibration. 

In case of misalignment & bent shaft frequency of dominant vibration (Hz=rpm/60) Usually 1 x rpm often 2 x rpm Sometimes 3 & 4 x rpm

 

Fikry Abdul Wahid
par Fikry Abdul Wahid , Mechanical Engineer , YKK

Hi, based on your question, I think you want to know if frequency(rpm) of motor is same as frequency of other part. Which create resonance. The basic thing you have to do is to check the working frequency. If the frequency is same with other component means, RESONANCE will occur. Vibration will be very high.In term of tolerance, it is based on company. It has no rule. If u hv anythin, i like to know more.

More Questions Like This

Avez-vous besoin d'aide pour créer un CV ayant les mots-clés recherchés par les employeurs?