What is Vector Group of transformer?

Three phase transformer consists of three sets of primary windings, one for each phase, and three sets of secondary windings wound on the same iron core. Separate single-phase transformers can be used and externally interconnected to yield the same results as a 3-phase unit.

The primary windings are connected in one of several ways. The two most common configurations are the delta, in which the polarity end of one winding is connected to the non-polarity end of the next, and the star, in which all three non-polarities (or polarity) ends are connected together. The secondary windings are connected similarly. This means that a 3-phase transformer can have its primary and secondary windings connected the same (delta-delta or star-star), or differently (delta-star or star-delta).

It’s important to remember that the secondary voltage waveforms are in phase with the primary waveforms when the primary and secondary windings are connected the same way. This condition is called “no phase shift.” But when the primary and secondary windings are connected differently, the secondary voltage waveforms will differ from the corresponding primary voltage waveforms by 30 electrical degrees. This is called a 30 degree phase shift. When two transformers are connected in parallel, their phase shifts must be identical; if not, a short circuit will occur when the transformers are energized.”

further details are availble here.

http://www.bayt.com/en/specialties/q/295669/is-the-paralle-operation-of-transformers-is-possible/?invitation_token=zPCVIUA3UOvSW9Jp9MZnmaL4hkHQYtvP&utm_campaign=specialties_invite_to_answer_en&utm_source=subscription&utm_medium=email

The vector group of transformer is the phase difference between the primary and the secondary sides. Dyn11, Dyn1, and so on… there so many. If the two transformers of different vector groups are connected in parallel then phase difference exist between the secondary of the transformers and large circulating current flows between the two transformers which is very damaging.

The vector group of transformer is an essential property for successful parallel operation of transformers.

vector group of transformer is the phase shift between primary and the secondary windings.

Answer needs a detailed description, thats why only share a beautiful link on this topic .

http://electrical-engineering-portal.com/understanding-vector-group-transformer-1

A very detail answer has been already Added by Mr Adnan Ahmad