Communiquez avec les autres et partagez vos connaissances professionnelles

Inscrivez-vous ou connectez-vous pour rejoindre votre communauté professionnelle.

Suivre

What is the range of values for open type cooling tower water in UAE. - pH - Conductivity - TDS.

user-image
Question ajoutée par Asif Ahmed , Operations Manager , Infinity Facilities Management & Services
Date de publication: 2016/06/09
MOHAMED  ABDALLA
par MOHAMED ABDALLA , Adminstrator , oFOUQ

Water containing TDS concentrations below 1000 mg/litre is usually acceptable to consumers, although acceptability may vary according to circumstances. However, the presence of high levels of TDS in water may be objectionable to consumers owing to the resulting taste and to excessive scaling in water pipes, heaters, boilers, and household appliances (see also the section on Hardness). Water with extremely low concentrations of TDS may also be unacceptable to consumers because of its flat, insipid taste; it is also often corrosive to water-supply systems

 

 The  pH for drinking water should preferably be less than 8.0

severance: WHO

 

Shaikh Ameer
par Shaikh Ameer , Chemical Cleaning Bay Operator , Royal Navy Of Oman

Ph will be 6 to 7

And TDS(total dissolve Solid) will be 230 mg per litre

Conductivity is 400

Atif Siddiqui
par Atif Siddiqui , "PLANT OPERATOR , WABAG OPERATION & MAINTENANCE WLL

PH 6.9 to 7.3 & TDS 110 to 140

PINTU KHANRA
par PINTU KHANRA , DISTRIBUTED CONTROL SYSTEM ,FIELD OPERATION , MCPI PRIVATE LIMITED

PH- 7.5 to 7.9  & TDS-4500

Manikandan Ramachandran
par Manikandan Ramachandran , Sr.HVAC/Mechanical Design Engineer , Muscat Electronics LLC-DAIKIN Aircondition division

As per the UAE Green Building Regulations & Specifications, Chapter 603.02 Water Consumption for Heat Rejection Including Cooling Towers, we couldn't use the potable water for heat removing process(cooling towers). so we have to use seawater or recycled water for cooling towers. since the value for PH must be consider 8 and conductivity - TDS must be 400 ppm to 600 ppm range.(Refer the DOLPHIN System and NALCO Cooling tower manual and documents.

moses shikuku
par moses shikuku , Water Treatment Specialist , mumias sugar company

THE PH SHOULD RANGE BETWEEN 6 TO 7 WHILE THE TDS SHOULD RANGE BETWEEN 200 TO 600.

shervin mohammadirad
par shervin mohammadirad , coordinator , ariahangard

pH=6-7 Conductivity=2S/m,TDS=400ppm

Cristian Mazzolini
par Cristian Mazzolini , Process Engineer , Petrobras

Water program treatment (pH, conductivity, TSD, inhibitors level or dispersants) for cooling tower depends on metallurgy systems, temperature and make up water qualify. 

Ankit Johari
par Ankit Johari , Executive QA , Hindustan coca-cola beverages pvt. Ltd.

pH of the water should be 6.5-8.5

Tds of the swater is usually -300-400 mg/lit

conductivity of water vary as tds.

 

Qassem Alyasein
par Qassem Alyasein , Quality Controller , The Ministry of Water and Irrigation

The proportion of TDS in the water should not exceed 1000 mg / L, according to the specifications in place, and when exceeding this value should be treated by R.O unit If there is a good quality water source the best treatment by mixing, concerning the degree of acidity (pH) should not exceed 8.

More Questions Like This

Avez-vous besoin d'aide pour créer un CV ayant les mots-clés recherchés par les employeurs?