What are the ways to maintain the good condition of the forklift?

They should visually inspect for leaks, obvious damage, and tyre condition, the operation of safety lights, service, parking brakes, horn, and steering. They should then check the mast operation by raising and lowering the forks both with and without a load, and finally check the levels of engine oil, fuel, radiator water and hydraulic fluid.

Always check oil,hydraulic,tire,engine,body of equipment,warning lights,radiator,lifting hawk,and fuel before start the equipment or start the work. And after finish the work make sure that the equipment was clean and its in his disignated parking area.

must follow the manufacturers maintenance

according to the manual

check the tyres condition.

check oil leakage.

check brakes

check the lights

Always check the oil & the water before operate

check first before you use it ..brakes,lights,oil,water,battery,air and gas

Always check all the warning decals, wipers, beacon light, signal light, front light, hazzard light and brake light if its working, check side mirrors, oil, hydraulic fluid, water, diesel/gas/battery level, tire pressure and check around the body for the damage or dent before starting the engine.

1. Engine oil level checking 
2. hydrualic oil level checking 
3. physical visual inspection of body tires and hydrualic system 
4. Running hours checking
5. schedule servicing and parts replacement acording OEM manua 

Check the front and rear tyres, then check the hardwares on the forklift and including the hydraulic etc.

yes. i can drive forklift.

A forklift has its fluids such as hydraulic fluids, transmission fluids, motor oil, coolants and others, which are essential to its working condition. These fluids help the engine function properly along with other parts of the forklift and always make sure to check the tires, light, brakes etc.