Register now or log in to join your professional community.
A camber is a trapeze handy tool made from playwood or hard wood with a bubble level installed at its horizontal top side, intended for checking at the roadworks site the pavement cross (crown) slope.
It is1,80m length, 0,20m height from one side and0,11m from the other when installed in perfectly horizontal position on the pavement the camber indicates that the crown is5% slope as its bottom side.
A slightly convex curvature built into a truss or beam to compensate for deflection under a load. Camber is also built into roadways,structural components, or bridges to facilitate run off of water.
actually, camber is on of the technical specificatoin requirement.
in any structure, camber is slop starting from the mid of the beam till the end. and it depends on the span length.
nomally, camber is used for beams or slab which has length span more than5 m to reduce deflection.
the slope provide in the road top surface is call camber
it is for the perpose of rain water and other water to remove easily from the road
Curvax slope in sectional area provided for draining out the water especially on roads is Camber
Do you need help in adding the right keywords to your CV? Let our CV writing experts help you.