Start networking and exchanging professional insights

Register now or log in to join your professional community.

Follow

True or false. A Distributed Virtual Switch is very much like a physical switch that detects which VMs are logically connects to each port and uses that information to forward network traffic. Hint: It is not used for monitoring and administration across a data center?

user-image
Question added by Shaik Tharim Kharni , IT Solutions Professional , GulfNet Solutions Company Limited
Date Posted: 2016/06/02
Waisudin Farzam
by Waisudin Farzam , IT and Datacenter Specialist , Ministry of Mines and Petroleum

vNetwork Distributed Switch (dvSwitch, vDS)

The configuration of vDS is centralized to vCenter Server. The ESXi/ESX 4.x, ESXi 5.x, and ESXi 6.0 hosts that belong to a dvSwitch do not need further configuration to be compliant.Distributed switches provide similar functionality to vSwitches. dvPortgroups is a set of dvPorts. The vDS equivalent of portgroups is a set of ports in a vSwitch. Configuration is inherited from dvSwitch to dvPortgroup, just as from vSwitch to Portgroup.Virtual machines, Service Console interfaces (vswif), and VMKernel interfaces can be connected to dvPortgroups just as they could be connected to portgroups in vSwitches.Administrative rights are required to create these virtual adapters on each ESXi/ESX host dvSwitch in vCenter Server:

  • Service Console and VMKernel interfaces
  • Physical NICs and their assignment to dvSwitch Uplink groups

Comparing vNetwork Standard Switch with vNetwork Distributed Switch

These features are available with both types of virtual switches:

  • Can forward L2 frames
  • Can segment traffic into VLANs
  • Can use and understand 802.1q VLAN encapsulation
  • Can have more than one uplink (NIC Teaming)
  • Can have traffic shaping for the outbound (TX) traffic

These features are available only with a Distributed Switch:

  • Can shape inbound (RX) traffic
  • Has a central unified management interface through vCenter Server
  • Supports Private VLANs (PVLANs)
  • Provides potential customization of Data and Control Planes

vSphere 5.x provides these improvements to Distributed Switch functionality:

  • Increased visibility of inter-virtual machine traffic through Netflow.
  • Improved monitoring through port mirroring (dvMirror).
  • Support for LLDP (Link Layer Discovery Protocol), a vendor-neutral protocol.
  • The enhanced link aggregation feature provides choice in hashing algorithms and also increases the limit on number of link aggregation groups.
  • Additional port security is enabled through traffic filtering support.
  • Improved single-root I/O virtualization (SR-IOV) support and 40GB NIC support.
vSphere 6.0 provides these improvements to Distributed Switch functionality:
  • Network IO Control – New support for per virtual machine Distributed vSwitch bandwidth reservations to guarantee isolation and enforce limits on bandwidth.
  • Multicast Snooping - Supports IGMP snooping for IPv4 packet and MLD snooping for IPv6 packets in VDS. Improves performance and scale with multicast traffic.
  • Multiple TCP/IP Stack for vMotion - Allows vMotion traffic a dedicated networking stack. Simplifies IP address management with a dedicated default gateway for vMotion traffic.

More Questions Like This

Do you need help in adding the right keywords to your CV? Let our CV writing experts help you.