Register now or log in to join your professional community.
1. First we should comunicate with asset owner and understand what he was facing the issue with asset.
2. Then easily we can identify the issue and solution as well.
3. Then step by step solve the issue in better way.
Note: we should solve the issue with in less time because system downtime will impact on projects and users paying hours.
Identifyinf the problem
selecftion the possible solution
evaluate the solution
selet the best solution and apply
difference between Hub vs Switch in the method in which frames are being delivered. In a hub, a frame is passed along or "broadcast" to every one of its ports. The hub has no way of distinguishing which port a frame should be sent to. A switch, however, keeps a record of the MAC addresses of all the devices connected to it. With this information, a switch can identify which system is sitting on which port. So when a frame is received, it knows exactly which port to send it to, Routers are completely different devices. Where a hub or switch is concerned with transmitting frames.
Performed basic analysis. Check the background/history of error occurrence. Then do the isolation by elimination by subtitution.
These are the best way to do a troubleshooting:
1.Get the claim information from customer or field member first.
2. Remove all input output device from the set.
3. Confirm the symptom whether it is same as reported or not.
4. Once the symptom is confirmed, proceed with tackling the issue base on the symptom.
5. If it is related to power issue then just focus on power supply line. Few tips on how to troubleshoot power line:
- check incoming power supply
- check main fuse and other fuse that related to power line whether it is open or close
- if the fuse in close/good then you have to do a further checking until you found the faulty line.
- if the fuse is open/no good, then check whether that line is short to ground or not.
- if the line is not short to ground then just simply replace the fuse and that should rectify the problem.
-but if the line is short to ground then you have to hang or remove few parts to identify which part is causing the short to ground problem. Usually it is ic or capacitor is causing this problem.
6. If the symptom related to sound, picture or performance you can just simply try to update the software to the latest firmware available. If it solved the problem it is software issue.
7.If the problem still not rectify, then you the troubleshoot the hardware by focusing on the related line such as audio circuit or video circuit.
8.Once you found the faulty part replace it and you have aging the set for few period of time to ensure that the symptom is totally gone.
9.Done
1-Uninstall unused programs
2-Delete temporary files
3-Prevent unnecessary start ups
4-increase ram .
5-Run disk clean up
listen to the client and know everything about the problem even if its appear to him its nothing maybe u know some little things it will help you in solving.
The best is to observe and analyses the situation.Measure specific results at test points.If until last test point is ok then go ahead.Or one can devide an situation in exactly two half and find out the problem in particular,then further divide it..and go on till you get exact cause.This helps is saving time and energy.
the best way to solve T.Shoot
1- listen to the client and know everything about the problem even if its appear to him its nothing maybe u know some little things it will help you in solving .
2- organize your way in solving the problem like but all of your possibility in ur brain like 1,2,3,4 so you will know what you can check
3- after solving the problem better to make a documentation for yourself especially if its new problem so you will remember it
Do you need help in adding the right keywords to your CV? Let our CV writing experts help you.