Register now or log in to join your professional community.
Welding-is the most economical and efficincient way to join metal permanently NDT-is the process of inspecting, testing ,or evauating materials,components or assemblies without destroying the serviceability of the part or system. Inspection-is the most formal form of reviews, a strategy adopted during static phase.
Well, you've already been told what welding is. However, of course, this process is more interesting and serious. I think it also makes sense to talk about safety. In general, I found the most detailed information here https://wisewelders.com/educational-guides/welding-safety-gear/, so you can read this article too. Safety should come first.
Welding is a process of fusion of metal together ,
NDT is a inspection method to identify weld defect
welding is the process of joining two metal parts by the application of heat and pressure or both,
NDT techniques are used to inspect the weld without destruction of welded metal i.e the inspection while the weld remian intact,
WELDING IS THE JOINING OF 2 OR MORE METAL PARTS TOGETHER BY HEATING THE SURFACES TO THE POINT OF MELTING WITH ELECTRIC ARC NDT IS THE PROCESS OF INSPECTING ,TESTING OF MATERIALS COMPONENTS
the NDT IS NON DESTRUCTIVE TESTING
WELDING. is a METAL to METAL tie up using of deferint type of welding process. like a SMAW,GMAW,FCAW,GTAW,MMAW.OAW.
NDT. is a required of company to infection of welding joint of any defect like .tungsten inclusion,slug,porosity,pinhole,luck of fusion exist penetration,under cut.
Gas metal arc welding (GMAW), sometimes referred to by its sub types metal inert gas (MIG) welding or metal active gas (MAG) welding, is a welding process in which an electric arc forms between a consumable wire electrode and the work piece metal(s), which heats the work piece metal(s), causing them to melt and join.
Nondestructive testing or Non-destructive testing (NDT) is a wide group of analysis techniques used in science and technology industry to evaluate the properties of a material, component or system without causing damage.
Careful extermination for every MIG Welding process or NDT Testing during inspection time.
is a wide group of techniques and analysis used in science and technology industry to evaluate the properties of materials
1. Gas metal arc welding (MIG welding) Welding is a fabrication or sculptural process that joins materials, usually metals or thermoplastics, by causing fusion, which is distinct from lower temperature metal-joining techniques such as brazing and soldering, which do not melt the base metal.
2. Nondestructive testing (NDT) is the process of inspecting, testing, or evaluating materials, components or assemblies for discontinuities, or differences in characteristics without destroying the serviceability of the part or system. In other words, when the inspection or test is completed the part can still be used.
3.It is determined by any discontinuities or cracks in the material will be finding out and the material should be in perfect condition .
Permanent connection method is welding two pieces as a result of a suitable combination of pressure and high temperature occur.Non-destructive testing
Do you need help in adding the right keywords to your CV? Let our CV writing experts help you.
