أنشئ حسابًا أو سجّل الدخول للانضمام إلى مجتمعك المهني.
M = Make-up water in m3/hr
C = Circulating water in m3/hr
D = Draw-off water in m3/hr
E = Evaporated water in m3/hr
W = Windage loss of water in m3/hr
X = Concentration in ppmw (of any completely soluble salts à usually chlorides)
XM = Concentration of chlorides in make-up water (M), in ppmw
XC = Concentration of chlorides in circulating water (C), in ppmw
Cycles = Cycles of concentration = XC / XM ppmw = parts per million by weight
A water balance around the entire system is:
M = E + D + W
Since the evaporated water (E) has no salts, a chloride balance around the system is:
M (XM) = D (XC) + W (XC) = XC (D + W)
and, therefore:
XC / XM = Cycles = M / (D + W) = M / (M û E) = 1 + {E / (D + W)}
From a simplified heat balance around the cooling tower:
(E) = (C) (ΔT) (cp) / HV
where: HV = latent heat of vaporization of water = ca. 2260 kJ / kg
ΔT = water temperature difference from tower top to tower bottom, in °C
cp = specific heat of water = 4.184 kJ / kg / °C
Windage losses (W), in the absence of manufacturer's data, may be assumed to be: W = 0.3 to 1.0 percent of C for a natural draft cooling tower
W = 0.1 to 0.3 percent of C for an induced draft cooling tower
W = about 0.01 percent or less of C if the cooling tower has windage drift eliminators
Concentration cycles in petroleum refinery cooling towers usually range from 3 to 7. In some large power plants, the cooling tower concentration cycles may be much higher.
(Note: Draw-off and blowdown are synonymous. Windage and drift are also synonymous.)
Source: http://www.eng-tips.com/faqs.cfm?fid=1152
For any clarification, dont hesitate to ask.
هل تحتاج لمساعدة في كتابة سيرة ذاتية تحتوي على الكلمات الدلالية التي يبحث عنها أصحاب العمل؟